OverviewCasting optionsComparisonMold flowAlloysFAQ
Casting molds: gravity die, aluminium die casting and low pressure
The quality of a metal casting is decided in the mold design: runner and feeder layout, thermal balance, venting and correct placement of cores. At OSKA, gravity die (permanent mold) and aluminium die casting molds are our main business. We design your molds, assess them for filling and solidification, machine them in our own workshop and deliver them ready for your foundry’s machine.
For casting we build the mold; the casting itself is done by your foundry or the plant you work with. To design the mold for your machine we only need the machine type, clamping force and mounting dimensions at the quotation stage.
Casting options
Which process for which part?
| Criterion | Gravity die | Low pressure | High pressure die casting |
|---|---|---|---|
| Filling | By gravity, from the top | By low gas pressure, from below | At high pressure and speed, from the shot sleeve |
| Typical wall thickness | 4 mm and above | 3 mm and above | 1–4 mm |
| Cycle time | Minutes | A few minutes | Seconds |
| Heat treatment (T6) | Suitable | Suitable | Usually not suitable (gas porosity blisters) |
| Cores | Sand cores possible | Sand cores possible | Steel cores and slides only |
| Mold cost | Medium | Medium–high | High |
| Suitable volume | Low–medium | Medium–high | High |
| Typical parts | Pump and valve bodies, lighting pole parts, heat-treated parts | Wheels, cylinder heads, pump housings | Motor and electronics housings, LED luminaire housings, brackets |
Casting mold workflow
-
Part review
Wall thickness, draft, cores and machining allowances are reviewed; the as-cast drawing is prepared together.
-
Gating and solidification design
Gates, overflows, feeders and venting; solidification should progress towards the feed.
-
Mold design
Die halves, cores, slides, cooling and heating channels and ejection are designed in 3D.
-
Approval and steel
The design is submitted for approval; hot-work tool steel and standard parts are ordered.
-
Machining and heat treatment
Components are machined, hardened and nitrided where needed.
-
Assembly and trial
The mold is assembled, trial casting is done at your foundry, samples are measured and corrections made.
Common aluminium casting alloys
| EN AC | Designation | Similar grades | Key property |
|---|---|---|---|
| 46000 | AlSi9Cu3(Fe) | A380, ADC10 | The most common die casting alloy; good balance of castability and strength |
| 46100 | AlSi11Cu2(Fe) | ADC12, A383 | More fluid; thin-walled, complex parts |
| 44300 | AlSi12(Fe) | A413 | Excellent fluidity and pressure tightness; thin walls |
| 43400 | AlSi10Mg(Fe) | A360 | Good corrosion resistance and mechanical properties |
| 42100 | AlSi7Mg0.3 | A356 | Gravity and low pressure casting; high strength after T6 |
Frequently Asked Questions
Do you also do the casting?
For casting molds we build the mold; casting is done by your foundry or partner plant. We attend the trial casting and correct the mold based on sample results.
Can you machine the castings?
Yes. We machine castings on our CNC milling and CNC turning machines.
Can you repair my existing die?
Yes. We inspect cracks, wear and soldering and propose repair or renewal.
What should I send for a quote?
3D model, alloy, annual volume and your casting machine data (type, clamping force, mounting dimensions).