Prototipten seri üretime, kalıptan bitmiş parçaya — İzmir'den. E-posta: info@oskakalip.com Telefon: 0506 462 17 78 WhatsApp Sohbeti Teklif Başlat
Fiyat teklifi alın

Ana Sayfa / English / CNC Turning

CNC Turning

Shafts, bushings and custom rotational parts, built on experience from the manual lathe to CNC turning.

Türkçe sürüm

OverviewHow it worksStrengths and limitsOperationsMaterialsFinishesApplicationsFAQ

Turning is where we started

The production experience behind OSKA began on a manual lathe in 2008. Today we carry the same craft onto CNC lathes, with dimensions that repeat from part to part. Turning is the fastest and most economical machining method for parts that are symmetrical about an axis, such as shafts, bushings and flanges.

We turn customer parts, and we also turn the round components of our own molds: guide pillars, bushings, ejector parts and core pins. Turning is therefore a natural part of mold making in our workshop.

How CNC turning works

In milling the tool rotates and the part stands still; in turning it is the other way round. The workpiece is clamped in the chuck and rotates about its own axis. A stationary cutting tool approaches the part and moves along the axis (Z) and towards the diameter (X), removing material. Once the program is proven, every part follows the same tool path.

ChuckWorkpiece (rotates)Cutting toolFeedRotation
In turning the part rotates and the tool feeds: every rotational surface is produced by these two motions.
  • Clamping: the stock is held in the chuck; long parts are supported by the tailstock.
  • Roughing: excess material is removed quickly and the part takes its main shape.
  • Finishing: size and surface are brought to their final values with a light cut.
  • Grooves, threads, bores: made with separate tools in the same set-up.
  • Parting and inspection: the part is cut from the bar and critical dimensions are checked.

Strengths and limits of turning

Strengths

Fast material removalRotational parts take shape far quicker than they would on a mill.
Repeatable dimensionsAfter first-part approval the same program runs for the whole batch.
Good surfaceWith the right tool and feed, most parts need no further finishing.
Low set-up costNo tooling investment; the same method serves one part or a series.
Wide material rangeSteels, aluminium, brass, copper and engineering plastics.

Limits

ShapeOnly rotationally symmetric surfaces are turned; flats, pockets and off-axis holes need milling.
Slender partsParts that are very long for their diameter deflect and need support and careful cutting.
Very high volumesIn very large series the unit cost does not fall as far as with molded or cast parts.

If a turned part also needs a keyway, a flat or a cross hole, it is completed on a vertical machining centre in the same workshop.

Turning operations we perform

Operation What it does Typical example
External turning Brings the outside surface to the required diameter Shafts, pins, pillars
Facing Sets part length and squares the end face Flange faces, bushing ends
Drilling and boring Opens an axial hole and brings it to size Bushings, sleeves, bearing seats
Grooving Circlip, O-ring and relief grooves Sealing seats
Threading Internal and external metric or special threads Fittings, connectors
Taper and radius turning Angled and radiused transitions Tapered shafts, seating faces
Knurling Grip pattern on hand-held surfaces Adjusting knobs, handles
Parting off Separates the finished part from the bar Series parts

Materials we turn

Group Examples Note
Carbon and alloy steels C45, 42CrMo4, 16MnCr5 Shafts, pins and load-bearing parts
Mold steels 1.2311, 1.2738, 1.2344 Guide pillars, core pins, ejector bodies
Stainless steels 304, 316, 420 Parts needing corrosion resistance
Aluminium alloys 6061, 6082, 7075 Light, fast-machining parts
Copper alloys Brass, bronze, copper Bushings, bearings, conductive parts
Engineering plastics POM, PA6, PTFE, PEEK Insulating and low-friction parts

Surface and finishing

Parts are supplied “as machined” by default: tool marks are visible and sharp edges are broken. Depending on the function, bead blasting, anodising, plating, heat treatment or grinding can be added. See the Surface Finishes Guide for the options and the materials they suit.

What we make

  • Shafts, pins and bushings
  • Flanges and threaded connection parts
  • Mold guide pillars, bushings and ejector components
  • Custom rotational parts from a sample or a drawing
PrototypesThe part is machined from the real material and tested before series production.
Mold componentsThe round parts of the mold are made in the same workshop and go straight to assembly.
Series partsAn approved program delivers the same dimensions on repeat orders.

Frequently Asked Questions

Do you take turning-only jobs?

Yes. Turning work is accepted independently of mold projects.

Can you machine a part from a sample?

Yes. We measure the sample, confirm the dimensions with you and then start production.

Which tolerances can you hold?

It depends on the diameter, length and material. We review each toleranced dimension at the quotation stage and tell you in advance what is achievable.

What do you need for a quotation?

A drawing or 3D model (STEP), the material, the quantity and any finishing requirement.

Turning or milling: which suits my part?

If the main shape is rotational, turning is faster and cheaper. Prismatic parts with pockets and several faces suit milling. Many parts use both.

Request a Quote

Kalıp ve hassas parça işleriniz için üretim ortağınız

Kokil, plastik enjeksiyon ve alüminyum enjeksiyon kalıpları ile CNC talaşlı imalat tek atölyede. Teknik resminizi gönderin, birlikte değerlendirelim.

Bize Ulaşın
Kasım 16, 2026

Stainless Steel Grades in CNC Machining: 303, 304, 316, 420 and 17-4 PH

Devamını oku
Kasım 16, 2026

CNC İşlemede Paslanmaz Çelik Türleri: 303, 304, 316, 420 ve 17-4 PH

Devamını oku
Tüm haberler ve yazılar