Prototipten seri üretime, kalıptan bitmiş parçaya — İzmir'den. E-posta: info@oskakalip.com Telefon: 0506 462 17 78 WhatsApp Sohbeti Teklif Başlat
Fiyat teklifi alın

Ana Sayfa / English / CNC Milling

CNC Milling

Milling of mold cores, plates and custom parts on vertical machining centres.

Türkçe sürüm

OverviewHow it worksStrengths and limitsOperationsMaterialsFinishesApplicationsFAQ

Milling, from mold steel to custom parts

Our vertical machining centres cut the cores, cavities and plates of our own molds as well as custom parts for our customers. Dimensions are checked against your drawing.

CNC milling removes material from a solid block with rotating cutters. Because it needs no tooling it is economical even for a single part, and in mold making every shape-giving surface of the mold is produced this way.

How a vertical machining centre works

The part is fixed to the table, in a vice or in a dedicated fixture. The vertical spindle rotates the tool while the table and spindle move in X, Y and Z at the same time, following the programmed tool path. Thanks to the tool changer, many operations, from rough milling to drilling and tapping, run one after another in a single set-up.

  • CAM programming: tool paths are prepared on the 3D model and checked for collisions.
  • Clamping and zeroing: the part is fixed and the reference point is set on the machine.
  • Roughing: most of the material is removed, leaving stock for finishing.
  • Semi-finishing and finishing: surfaces are brought to final size and quality in small steps.
  • Holes and threads: drilling, reaming and tapping are completed in the same set-up.
  • Inspection: critical dimensions are checked on and off the machine.

The number of set-ups and tool access drive the cost of a machined part most. Deep narrow pockets, sharp internal corners and unnecessarily tight tolerances all add time.

Strengths and limits of milling

Strengths

No toolingNo mold investment for the first part; a design change only affects the program.
Real materialPrototypes are cut from the same material that will be used in production.
Tight tolerancesFits, bearing seats and reference holes can be machined accurately.
Complex shapesPockets, slots, angled and free-form surfaces in one piece.
From one part to a seriesThe same program gives the same result on repeat orders.

Limits

Tool accessInternal voids, undercuts and very deep narrow pockets cannot be reached, or need extra set-ups.
Internal cornersA round tool leaves a radius; where a sharp internal corner is required, sinker EDM takes over.
High volumesAs quantity grows, unit cost does not fall as quickly as with molding or casting.

Milling operations we perform

Operation What it does Typical example
Face milling Flattens large planes and sets plate thickness Mold plates, base faces
Pocket and slot milling Opens closed and open pockets and slots Insert pockets, slide guides
Contour milling Shapes the outer and inner profile Flanges, brackets
3D surface milling Free-form surfaces with ball-nose cutters Mold cavities, cores, electrodes
Drilling and reaming Opens holes and brings them to precise size Pillar and pin holes
Tapping and thread milling Cuts internal threads Fixing and lifting holes
Chamfers and radii Breaks edges and blends transitions All machined parts
Cooling channel drilling Water lines in mold plates Injection and gravity die molds

Materials

Group Examples Typical use
Plastic mold steels 1.2311, 1.2738, 1.2312, 1.2083 Cavities, cores, inserts
Hot-work steels 1.2343, 1.2344 (H13) Aluminium die-casting and gravity die molds
Cold-work steels 1.2379, 1.2080 Cutting and wear parts
Structural and carbon steels S235, S355, C45, 42CrMo4 Plates, fixtures, machine parts
Aluminium alloys 5083, 6061, 6082, 7075 Light parts, fixtures, prototype molds
Copper and graphite Electrolytic copper, graphite Sinker EDM electrodes
Engineering plastics POM, PA6, PE, PTFE, PEEK Insulating and sliding parts

Surface and finishing

The default delivery is an as-machined surface. Polishing and texturing for mold cavities, bead blasting and anodising for aluminium parts, and heat treatment, black oxide or plating for steel parts are added according to the function. Details are in the Surface Finishes Guide.

What we make

  • Mold cores and cavity halves
  • Mold plates and inserts
  • Jigs, fixtures and clamping elements
  • One-off or series custom parts
PrototypesThe design is verified with a real part machined from the production material.
Mold makingAll shape-giving parts of gravity die, plastic injection and aluminium die-casting molds.
End-use partsLow and medium volume machine parts, fixtures and spare parts.

Frequently Asked Questions

Can I order a single part?

Yes. We work from one-off parts to series production.

Can I supply the material?

You can send the material or leave the sourcing to us.

Which file formats do you accept?

STEP or IGES for 3D models and PDF or DWG/DXF for drawings. Tolerances and surface requirements should be stated on the drawing.

Should my part be machined or molded?

Quantity, material and geometry decide. CNC is more economical at low quantities, tooling at high quantities. See the Manufacturing Method Guide.

Do you machine hardened parts?

Precise surfaces remaining after hardening are machined with suitable tools; sharp corners and deep narrow forms the cutter cannot reach are finished by sinker EDM.

Request a Quote

Kalıp ve hassas parça işleriniz için üretim ortağınız

Kokil, plastik enjeksiyon ve alüminyum enjeksiyon kalıpları ile CNC talaşlı imalat tek atölyede. Teknik resminizi gönderin, birlikte değerlendirelim.

Bize Ulaşın
Kasım 16, 2026

Stainless Steel Grades in CNC Machining: 303, 304, 316, 420 and 17-4 PH

Devamını oku
Kasım 16, 2026

CNC İşlemede Paslanmaz Çelik Türleri: 303, 304, 316, 420 ve 17-4 PH

Devamını oku
Tüm haberler ve yazılar