What is CNC machining?Our servicesWhy OSKA?MaterialsTolerancesWorkflowFinishingFAQ
What is CNC machining?
CNC machining produces metal and plastic parts by removing material with cutting tools on computer-controlled machines. Once the program is prepared, the machine makes the same part to the same dimensions again and again. It works for any quantity from a single prototype to series production, and needs no mold.
OSKA’s roots are in machining: production experience since 2008 in various factories, from manual lathes to CNC lathes and machining centres, is also the basis of our mold making today. On the same machines we produce mold components and our customers’ custom parts.
Our CNC services
Why OSKA?
| What it gives you | |
|---|---|
| Mold-maker precision | The team and machines that make mold components work on your custom parts with the same care |
| From one part to series | No minimum order quantity; prototypes, small batches and repeat work |
| Design support | We share cost-saving design suggestions before machining starts |
| Under one roof | Milling, turning, EDM, fitting and assembly in one workshop |
| Measurement records | Critical dimensions are recorded and shared on request |
Materials we machine
| Group | Examples | Note |
|---|---|---|
| Aluminium | 6061, 6082, 7075, cast aluminium | Light, fast to machine; suits anodizing |
| Carbon and alloy steel | S235, C45, 42CrMo4 | General machine parts; can be heat treated and coated |
| Tool and mold steel | 1.2311, 1.2738, 1.2343, 1.2379 | Mold components, fixtures, wear parts |
| Stainless steel | 303, 304, 316, 420, 17-4 PH | See Stainless steel grades in CNC machining |
| Copper alloys | Brass, bronze, copper | Fittings, bushes, electrodes and conductive parts |
| Engineering plastics | POM, PA, UHMW-PE, PTFE, PEEK | Sliding parts, insulators, prototypes |
Tolerances
Dimensions without an individual tolerance follow ISO 2768 general tolerances, usually class “m – medium”. Fits are specified to ISO 286. Mark the tight dimensions on your drawing and we will review what can be achieved for each part at the quotation stage. See our Tolerance Guide.
From order to delivery
-
Quotation and review
We review your drawing and model and quote price and lead time by material, quantity and tolerances.
-
Process plan and programming
Setups and operation sequence are defined; the CAM program is checked in simulation.
-
Material and fixtures
Material is verified and fixtures prepared to hold the part in the same position every setup.
-
Machining and in-process inspection
The first part is fully measured; critical dimensions are monitored at the machine throughout the run.
-
Secondary operations
Deburring, and where required heat treatment, coating or assembly.
-
Final inspection and shipping
Final measurement to the drawing, protective packaging and delivery.
Finishing
Parts can be delivered anodized, zinc or nickel plated, powder coated, blasted, passivated, black oxided or laser marked. See how each finish affects dimensions in our Surface Finishes Guide.
Frequently Asked Questions
Can I order a single part?
Yes. There is no minimum quantity; we work from one prototype to series production.
Which files should I send?
A 3D model (STEP, IGES, Parasolid) and a dimensioned drawing (PDF, DWG/DXF). Without a drawing we can also model from a sample part.
Can I supply the material?
Yes. We check its type and dimensions before machining.
Do you machine heat-treated parts?
Yes. Roughing before hardening, then finishing or sinker EDM after hardening.
How can I reduce cost?
Remove unnecessary tight tolerances, give inside corners a radius that suits the tool, and use standard thread and hole sizes.