OverviewWhy OSKA?Design and build flowMold typesMold steel and lifeMolds we makeResourcesFAQ
Plastic injection molds: the basis of series production
A plastic injection mold is a steel tool into which molten plastic is injected under pressure, reproducing the shape, dimensions and surface of the part identically with every shot. It consists of clamping plates, cavity and core, runner system, cooling channels, ejector system, slides and standard components. Part quality and unit cost depend largely on how well the mold is designed and machined.
At OSKA we build plastic injection molds from design to final assembly in our own workshop. Mold design, mold flow analysis, CNC machining, EDM, fitting, assembly and trials are under one roof, so every stage stays under our direct control. After handover we also offer trial and series molding.
Why OSKA?
| What it gives you | |
|---|---|
| One-stop molds | Design, machining, assembly and trials in one workshop; one point of responsibility |
| Support at the design stage | We review your part model for moldability and propose changes before the mold is started |
| In-house flow analysis | Gate location, weld lines, air traps and warpage are seen before steel is cut |
| Machining background | Production experience in turning, CNC turning and milling since 2008 |
| Maintenance and revision | Repairs and modifications on our own molds and on molds made elsewhere |
| Confidentiality | Your drawings are used only for quotation and production; an NDA is signed on request |
From design to series production
-
Design for manufacturability (DFM)
Wall thickness, draft, undercuts, parting line and tolerances are reviewed and change proposals reported.
-
Mold flow analysis
Filling, pressure, cooling and warpage are simulated; gate location and runner type are chosen accordingly.
-
Mold design
Cavitation, slides and lifters, cooling and ejection are designed in 3D.
-
Design approval
The mold design is checked against our checklist and submitted for your approval.
-
Steel ordering
Steel and standard components are ordered after approval.
-
Machining
Mold components are produced by CNC milling, turning, sinker EDM and grinding.
-
Fitting and assembly
Components are fitted, parting faces spotted and the mold assembled.
-
Trial and samples
Parts from the trial are measured, corrections made if needed and samples submitted for approval.
-
Series production and maintenance
Series molding starts with the approved mold; a maintenance plan is agreed together.
Mold types
| Type | When it is chosen |
|---|---|
| Prototype / rapid mold | To validate a design, get first samples or produce small batches; simpler construction and shorter lead time |
| Production mold | When high volume, long life and short cycle time are the goal |
| Multi-cavity mold | To get several small parts per shot |
| Hot runner mold | To remove runner waste and shorten the cycle; see Hot runner or cold runner? |
| Insert molding and overmolding | For parts with metal bushes, contacts or soft grip areas; see Insert molding and overmolding |
| Unscrewing mold | For threaded caps, glands and housings; see Thread release methods |
| Clear part mold | Mirror-polished molds for lenses, diffusers and clear covers; see Molding clear plastic parts |
Mold steel and expected life
Mold steel is chosen by total quantity, the abrasiveness of the resin (glass fibre, mineral filler) and the required surface quality. The values below are a guide; actual life depends on maintenance, process and part geometry.
| Mold class | Typical steel | Approximate life |
|---|---|---|
| Prototype | Aluminium or mild steel | Up to a few thousand shots |
| Medium volume | Pre-hardened steel (1.2311 / 1.2738) | Hundreds of thousands of shots |
| High volume | Hardened steel (1.2343 / 1.2344 / 1.2083) | A million shots and more |
Products we model and build molds for
- Ventilation fan impeller molds
- Plastic lighting bollard molds
- Round and square decorative recessed luminaire molds
- Vehicle licence plate holder molds
- Modular conveyor belt molds
- Electrical and electronic housings, covers and fittings
Resources
Frequently Asked Questions
What is the advantage of an injection mold?
Once the mold exists, parts are produced in short cycles, identical to each other and at a low unit cost. Complex shapes, snap fits and threads come out in a single shot.
What is the disadvantage?
The initial investment and lead time are high, and design changes are expensive once the mold is built. For low quantities a prototype mold or machining may be better.
How is the number of cavities decided?
Annual volume, part size, machine clamping force and target unit cost are weighed together. More cavities lower unit cost but raise mold price and the importance of balanced filling.
How long does a mold take?
It depends on part complexity, number of cavities and slides, and steel delivery. We state the lead time in writing with the quotation.
Who owns the mold?
A mold that has been paid for belongs to the customer. You can have parts molded with us or take the mold to your own plant.
Do you also mold the parts?
Yes. For plastic injection molds we also offer trial and series molding.