Prototipten seri üretime, kalıptan bitmiş parçaya — İzmir'den. E-posta: info@oskakalip.com Telefon: 0506 462 17 78 WhatsApp Sohbeti Teklif Başlat
Fiyat teklifi alın

Ana Sayfa / English / Plastic Injection Molds

Plastic Injection Molds

Design, flow analysis, manufacture, trial and series molding of plastic injection molds in one workshop.

Türkçe

OverviewWhy OSKA?Design and build flowMold typesMold steel and lifeMolds we makeResourcesFAQ

Plastic injection molds: the basis of series production

A plastic injection mold is a steel tool into which molten plastic is injected under pressure, reproducing the shape, dimensions and surface of the part identically with every shot. It consists of clamping plates, cavity and core, runner system, cooling channels, ejector system, slides and standard components. Part quality and unit cost depend largely on how well the mold is designed and machined.

At OSKA we build plastic injection molds from design to final assembly in our own workshop. Mold design, mold flow analysis, CNC machining, EDM, fitting, assembly and trials are under one roof, so every stage stays under our direct control. After handover we also offer trial and series molding.

Why OSKA?

What it gives you
One-stop molds Design, machining, assembly and trials in one workshop; one point of responsibility
Support at the design stage We review your part model for moldability and propose changes before the mold is started
In-house flow analysis Gate location, weld lines, air traps and warpage are seen before steel is cut
Machining background Production experience in turning, CNC turning and milling since 2008
Maintenance and revision Repairs and modifications on our own molds and on molds made elsewhere
Confidentiality Your drawings are used only for quotation and production; an NDA is signed on request

From design to series production

  1. Design for manufacturability (DFM)

    Wall thickness, draft, undercuts, parting line and tolerances are reviewed and change proposals reported.

  2. Mold flow analysis

    Filling, pressure, cooling and warpage are simulated; gate location and runner type are chosen accordingly.

  3. Mold design

    Cavitation, slides and lifters, cooling and ejection are designed in 3D.

  4. Design approval

    The mold design is checked against our checklist and submitted for your approval.

  5. Steel ordering

    Steel and standard components are ordered after approval.

  6. Machining

    Mold components are produced by CNC milling, turning, sinker EDM and grinding.

  7. Fitting and assembly

    Components are fitted, parting faces spotted and the mold assembled.

  8. Trial and samples

    Parts from the trial are measured, corrections made if needed and samples submitted for approval.

  9. Series production and maintenance

    Series molding starts with the approved mold; a maintenance plan is agreed together.

Mold types

Type When it is chosen
Prototype / rapid mold To validate a design, get first samples or produce small batches; simpler construction and shorter lead time
Production mold When high volume, long life and short cycle time are the goal
Multi-cavity mold To get several small parts per shot
Hot runner mold To remove runner waste and shorten the cycle; see Hot runner or cold runner?
Insert molding and overmolding For parts with metal bushes, contacts or soft grip areas; see Insert molding and overmolding
Unscrewing mold For threaded caps, glands and housings; see Thread release methods
Clear part mold Mirror-polished molds for lenses, diffusers and clear covers; see Molding clear plastic parts

Mold steel and expected life

Mold steel is chosen by total quantity, the abrasiveness of the resin (glass fibre, mineral filler) and the required surface quality. The values below are a guide; actual life depends on maintenance, process and part geometry.

Mold class Typical steel Approximate life
Prototype Aluminium or mild steel Up to a few thousand shots
Medium volume Pre-hardened steel (1.2311 / 1.2738) Hundreds of thousands of shots
High volume Hardened steel (1.2343 / 1.2344 / 1.2083) A million shots and more

Products we model and build molds for

  • Ventilation fan impeller molds
  • Plastic lighting bollard molds
  • Round and square decorative recessed luminaire molds
  • Vehicle licence plate holder molds
  • Modular conveyor belt molds
  • Electrical and electronic housings, covers and fittings

Resources

Frequently Asked Questions

What is the advantage of an injection mold?

Once the mold exists, parts are produced in short cycles, identical to each other and at a low unit cost. Complex shapes, snap fits and threads come out in a single shot.

What is the disadvantage?

The initial investment and lead time are high, and design changes are expensive once the mold is built. For low quantities a prototype mold or machining may be better.

How is the number of cavities decided?

Annual volume, part size, machine clamping force and target unit cost are weighed together. More cavities lower unit cost but raise mold price and the importance of balanced filling.

How long does a mold take?

It depends on part complexity, number of cavities and slides, and steel delivery. We state the lead time in writing with the quotation.

Who owns the mold?

A mold that has been paid for belongs to the customer. You can have parts molded with us or take the mold to your own plant.

Do you also mold the parts?

Yes. For plastic injection molds we also offer trial and series molding.

Request a Quote

Kalıp ve hassas parça işleriniz için üretim ortağınız

Kokil, plastik enjeksiyon ve alüminyum enjeksiyon kalıpları ile CNC talaşlı imalat tek atölyede. Teknik resminizi gönderin, birlikte değerlendirelim.

Bize Ulaşın
Kasım 16, 2026

Stainless Steel Grades in CNC Machining: 303, 304, 316, 420 and 17-4 PH

Devamını oku
Kasım 16, 2026

CNC İşlemede Paslanmaz Çelik Türleri: 303, 304, 316, 420 ve 17-4 PH

Devamını oku
Tüm haberler ve yazılar